EliteHEAT™ Battery Kit

Items needed:

•     X3 cartridge (full or half gram)
•     EliteHEAT^™ battery
•     Preheat chamber (separated from battery)

Step 1: Turn on the battery, if it’s not on already. Click the button 5 times really fast (one-two-three-four-five, within 1 second).

Step 2: Ensure the battery is set to the correct voltage setting – we recommend starting with white and going up from there. To cycle voltages, triple-tap the button (one-two-three, within 1 second): White >>> Blue >>> Green >>> Red >>> reset (White)

Step 3: Screw the cartridge onto the battery threads. Make sure the airflow holes are open.

Step 4: Slide the preheat chamber over the cartridge and screw it onto the battery.

Step 5: If the wax is solid – looks like tiny rock candy crystals, doesn’t flow at all – DO NOT PANIC; this is what you got the EliteHEAT^™ for.

Double-tap the button to start a preheat cycle, which lasts for 90 seconds if you let it do its thing. You’ll see the color change on the button as it goes – this is the voltage increasing every 30 seconds to fully heat the cartridge.

Step 6: Hold down the button while inhaling through the cartridge tip.

Step 7: Once you’re done, turn off the battery by repeating step 1.